Bob Smith "INSTA-CURE" Thin CA Glue - (ONE) 2 oz Bottle Cyanoacrylate Adhesive

Description

Bob Smith "INSTA-CURE" Thin CA Glue - (ONE) 2 oz Bottle Cyanoacrylate Adhesive
Bob Smith "INSTA-CURE" Thin CA Glue - (ONE) 2 oz Bottle Cyanoacrylate Adhesive
Pen Kit Mall Presents
BSI 103 (1 BOTTLES) 2OZ EACH
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
Unscrew top from nozzle. For finer applications, use the extender tip. Insta-Cure™ CA is used to bond tight fitting parts. Hold the parts together (sometimes using masking tape), then apply the Insta-Cure™ along the joints. The CA will penetrate deep into the joints. Bonding will occur in 1-3 seconds. Excess cured CA can be removed from surfaces like ceramics by rubbing with a paper towel soaked in Un-Cure™. Full strength is reached in two hours. Wipe the nozzle clean before replacing screw-on top. Refrigerate to extend shelf life. Cured CA is stable from -40 to 220º F. Soak extender tip in acetone for cleaning.
Thank you for looking at our products! At The Pen Kit Mall we can assure you that we will give you the best possible experience purchasing on Ebay. We strive for 100% however if we should fall short of our goal please reach out to us to solve any issues that should arise before leaving negative feedback.  Give us a chance to make it right.