60A MPPT Solar Panel Regulator Charge Controller DC12/24/36/48V Auto Max PV 190V

Description

60A MPPT Solar Panel Regulator Charge Controller DC12/24/36/48V Auto Max PV 190V New
FEATURE:
Charging 3-stage: constant current(MPPT), constant voltage(Absorption Voltage), floating charge
Selectable battery type Vented / Sealed / Gel / NiCd / Lithium battery (default is Sealed) (defined voltage for other battery by user)
Soft start time ≤1S, Dynamic response and recovery time 100us
Max efficiency ≥98.1%, PV utilization ≥99%
In order to reduce the cost of electricity caused by high current, PV and battery each have two terminals
MULTIPLE ELECTRONIC PROTECTIONS
Short-circuiting
Reverse-current
Overcharging
Overload
Over-discharging
Reverse polarity protection
Notes: The output terminal is for lamp only( 12V system less 60W, 24V/36V/48V system less 100W ),and it will be burnt if connecting to other loads. The output for the battery is no polarity reverse protection.
Remarks:
1. The maximum PV input voltage (Voc): DC160V (The controller can not work with this long duration voltage, which will interrupt the controller. Refer to the input voltage of PV).
2. The output port is only for lamps (12V system less 60W, 24V/36V/48V system less 100W) and will be burned if connected to other loads. The battery output is not reverse polarity protection.
3. Always connect the battery first!!! Make sure the battery voltage is sufficient for the controller to recognize the correct system voltage. The order of dismantling contradicts the order of wiring.
4. Do not connect any inverter/wind/generator or charger to the controller, please connect the inverter to the battery side.
5. Ensures the solar input voltage exceeds 3V or more than the battery voltage and the total input power exceeds the max. The charging current is almost zero when the controller has trickle charge.
Package Includes:
1PC * 60A MPPT Solar Controllers 1PC * User Manual (English)
Tips:
The maximum PV input power (The total rated power of PV must not exceed this watt, which will destroy the controller): 12V system (720W) / 24V system (1440W)/36V system (2100W) / 48V system (2800W).
Overcharge protection voltage: 12V system (15V) / 24V system (30V); 36V system (45V) / 48V system (60V).
Parameter
Models
MPPT-30A
MPPT-40A
MPPT-50A
MPPT-60A
Charging mode
MPPT Maximum power point tracking automatically
Charging
3-stage： constant current(MPPT), constant voltage(Absorption Voltage), floating charge
System type
DC12V/24V/36V/48V Recognition automatically
System vol automatic recognition
12V system (DC9V-DC15V)
24V system (DC18V-DC29V)
36V system (DC30V-DC39V)
48V system (DC40V~DC60V)
Soft start time
≤1S
≤1S
≤1S
≤1S
Dynamic response and recovery time
100us
100us
100us
100us
Max efficiency
≥98.1% (Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV utilization
≥99%
≥99%
≥99%
≥99%
Input specification
Voc from PV
( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )
12V system (DC20V~DC80V)
24V system (DC37V~DC105V)
36V system (DC50V~DC160V)
48V system (DC72V~DC160V)
The maximum PV input power
(The total power rated of PV can’t be over this watt that will break the controller.)
12V system (400W)
24V system (720W)
36V system (1000W)
48V system (1200W)
12V system (480W)
24V system (960W)
36V system (1400W)
48V system (1700W)
12V system (600W)
24V system (1200W)
36V system (1800W)
48V system (2200W)
12V system (720W)
24V system (1440W)
36V system (2100W)
48V system (2800W)
Output specification
Selectable battery type(default is Sealed)
Vented/ Sealed / Gel / NiCd / Lithium battery(defined voltage for other battery by user)
Absorption Charging Voltage
Refer to Batteries charging reference
Floating Charging Voltage
Refer to Batteries charging reference
Overcharging protection voltage
12V system (15V) / 24V system (30V) / 36V system (45V) / 48V system (60V)
Rated output current
30A
40A
50A
60A
Temperature Coefficient
±0.02%/ centi-degree
Automatic temperature compensation
14.2V-（Max temperature-25 centi-degree）*0.3
Output voltage ripple-peak
100mV
100mV
100mV
100mV
Output voltage accuracy
≤±1%
≤±1%
≤±1%
≤±1%
Indicating
LCD display
See LCD display instruction
See LCD display instruction
See LCD display instruction
See LCD display instruction
LED display
CPU working indicator
CPU working indicator
CPU working indicator
CPU working indicator
Protection function
Output over-voltage protection
See output specification
See output specification
See output specification
See output specification
Input Anti-intrusion protection
yes
yes
yes
yes
Temperature Protection
75 centi-degree
75 centi-degree
75 centi-degree
75 centi-degree
Temperature increased protection
Output power will reduce when it’s more 70 centi-degree.
Output power will be normal when it’s less than 55 centi-degree.
Fan-on temperature
>40 centi-degree
>40 centi-degree
>40 centi-degree
>40 centi-degree
Fan-off temperature
<35 centi-degree
<35 centi-degree
<35 centi-degree
<35 centi-degree
Other parameters
Acoustic noise
≤40dB
≤40dB
≤40dB
≤40dB
Cooling way
Forced air cooling.
Components
Imported materials，According to EU standards, Industrial grade range.
Environmental requirements
Meet 2002/95/EC; No cadmium, hydrides and fluorides
Properties
Size (mm)
215x115x50
215x115x50
215x115x50
215x115x50
Net weight(Kg)
1.1
1.1
1.1
1.1
Gross weight(Kg)
1.2
1.2
1.2
1.2
Security Level
According to CE、PSE、FCC、EMC,EN60950
Electromagnetic Compatibility
According to EN61000，EN55022，EN55024
Enclosure
IP21
IP21
IP21
IP21