100A MPPT Solar Charge Controller 12V 24V 48V Battery Regulator LCD Touch Screen

Description

100A MPPT Solar Charge Controller 12V 24V 48V Battery Regulator LCD Touch Screen
Remark :
1) The WIFI Modular or Bluetooth Modular can only with our MPPT Controller （ Runner or Esmart3 series MPPT）which is produced after November of 2020 .
2) The WIFI Modular and RS485 Cable can only work with our own MPPT Controller , can not work with other model MPPT Controller . So if your MPPT Controller is other model, we do not suggest you buy our WIFI Modular or RS485 , unless you buy our MPPT Controller.
3) About the WIFI Modular , we now have two types , one is Cloud-Box -M2 Modular , this modular is to realize the cloud monitoring function for our controllers ( remote monitoring ) , the other one is BT-02 Modular , this modular is to realize the Bluetooth monitoring function . So please choose the right Modular for your needs, if you need it .
Description:
RUNNER series is the most advanced mppt controller with Touch Screen, combined with the second generation of high conversion efficiency, back-light LCD  Touch Screen display, control mode, connect way, internal structure etc. features, also optimized the following points:
1.Increase all kinds of protection function to be used more reassuring.
2.Add the LOAD sampling to be used more clear of output load.
3.Wider PV Input voltage 150V
4. Reduce the static standby self-consumption, energy saving and more simply for small system.
Choose Runner, more intelligent in life!
Feature:
*
High-efficient MPPT algorithm, MPPT efficiency
≥99.5%.
*
Support Lithium Seal/Gel/Flooded battery and customized
batteries.
* Lithium ion battery activates arousal function .
*
Four types of load mode selection:
ON/OFF,
PV voltage
control, Dual Time control, PV+Time
control.
*
Current-limited charging
function.
*
High definition LCD
display.
*
Intelligent interaction
experience.
*
Support PC and APP (Android & iOS)
monitoring.
*
Dual
RS485
communication
ports,
support
for
parallel
communication.
*
CE, RoHS, FCC certifications
approved.
RUNNER Series
RUNNER         -
60A
RUNNER -80A
RUNNER -100A
Product Category
Controller properties
MPPT (Maximum power point tracking)
MPPT efficiency
≥99.5%
Standby power
0.5W~1.2W
System voltage
12V/24V/36V/48V auto work
Heat-Dissipating method
Fan
-cooling
Input Characteristics
Max.PV input voltage(Voc)
DC150V
Start charge voltage point
Battery voltage + 3V
Low input voltage protection point
Battery voltage + 2V
PV rated power
12V
system
780W
1040W
1300W
24V system
1560W
2080W
2600W
36V system
2340W
3120W
3900W
48V system
3120W
4160W
5200W
Charge Characteristics
Battery types (Default Gel battery)
Lithuim , Gel battery, Sealed lead-acid battery, Flooded battery, User-defined
Charge rated current
60A
80A
100A
Charge method
3 stages: CC (Constant current) - CV (Constant voltage) - CF (Floating charge)
LOAD
Characteristics
Load voltage
Same as battery voltage
Load rated current
30A
Load control mode
On, Off , PV voltage control, Dual-time control, PV + Time control
Display & Communication
Low voltage protection
The default protection point is 10.5V, and it is restored to 11V (can be set)
Setup method
PC software / Mobile APP / controller display
Display
High-definition LCD segment code backlight display
Dry contact access voltage
5V ~ 12V
Communication
Dual RJ45 port / RS485 / support PC software monitoring /support WiFi module for APP cloud monitoring / support centralized parallel monitoring
Other Parameters
Protections
Input over / low voltage, output over / low voltage, reverse connection, over temperature, short circuit, battery shedding etc.
Operating ambient temperature
-20
℃
~+50
℃
Storage temperature
-40
℃
~+75
℃
IP(Ingress protection)
IP21
Max. Battery wire (mm
2
/AWG)
30mm
2
Max. Load wire(mm
2
/AWG)
30mm
2
Recommended breaker
≥80A (60AMPPT Controller )
, ≥100A (80AMPPT Controller ) ,
≥120A (100AMPPT Controller )
Net weight (KG)/Gross weight (KG)
5 / 6.15
Product size (mm)/Packing size (mm)
380×210×80 / 490×350×195
Notice:
1. Our Runner MPPT Controller now can use with Mobile APP , you can buy WIFI Modular with us to use with Mobile APP , if you need, please contact with us .
2.If you want to connect PC/Laptop,you need to buy an RS485 communication cable.
3.Please be sure your solar panel input voltage is higher than 18V when you charge 12V battery , and your PV Input Votage more than 30V when you charge 24V battery bank , and your PV Input Voltage more than 60V when you charge 48V battery bank .
4.For this mppt solar charge controller , you need to connect with battery first , then connect with the solar panel . Because this solar charge controller , the power is supplied by the battery , so no matter  day time or night time , if this solar charge controller is connected with battery , it will be on all the time when it is turn on .
5.
If your battery is lithium battery , please tell us the work voltage range of your lithium battery , then we will adjust the voltage range of our MPPT Solar charge controller to meet the work voltage range of your lithium battery .
Package including:
1.1PCS MPPT solar charge controller
2.1PCS English User Manual
3.1PCS Temp. Sensor
4.2pcs Hang Bracket
SHIPPING :
We ship to international via FEDEX or DHL or TNT or UPS or EMS fast express shipping way .
Items are shipped within 1-4 business day after receive cleared payment.
FEEDBACK
Note: Do not hesitate to talk with us anytime before and after the purchases, we are committed to your 100% customer satisfaction.
I am here and ready to assist you with any question or concerns you might have before or after the purchase.
If you have the problem with the power inverter, please talk with us first with eBay message BEOFRE you open return request or file a dispute or leave the netural or negative feedback.
Any question will be replied within 24 hours except the weekend and statuary holiday in Chinese Beijing Time.
My goal is to make sure you are happy and having the pleasant shopping with us.