10/20/30A Solar Panel Battery Charge Controller 12V/24V Regulator Auto Dual USB

Description

There are optional 10A 20A 30A model
10A:
if your battery is 12V ,the max solar panel input is 25V  120W
if your battery is 24V ,the max solar panel input is 50V  240W
20A:
If your battery is 12V, the max solar panel input is 25V  240W
if your battery is 24V, the max solar panel input is 50V  480W
30A:
if your battery is 12V ,the max solar panel input is 25V  360W
if your battery is 24V ,the max solar panel input is 50V  720W
Features:
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable parameter.
3.Fully 4-stage PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
MODEL
PWM 10A
PWM 20A
PWM 30A
PWM 40A
PWM 50A
PWM 60A
Battery Voltage
12V 24V Auto
Charging Current
10A
20A
30A
40A
50A
60A
Discharging Current
10A
10A
10A
20A
30A
30A
Max Solar input
50V(for 24V battery) 25V(for 12V battery)
Equalization
14.4V(Sealed) 14.2V(Gel) 14.6V(Flood)
Float charge
13.7V(defaul,adjustable)
Discharge stop
10.7V(defaul,adjustable)
Discharge reconnect
12.6V(defaul,adjustable)
Charge reconnect
13V
Voltage of open light
Solar Panel
8V
(Light lights delay)
Voltage of close light
Solar Panel
8V
(Light off delay)
USB output
5V/3A
Self-consume
<10mA
Operating temperature
-35°C~+60°C
Size
133.5*70*35mm
133.5*70*35mm
*all red color voltage X2 ,while using 24V system.
Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
On Sep 28, 2022 at 02:24:35 PDT, seller added the following information: